If you have a tilt and turn window that you need to decorate or regulate the passage of light entering through it, the best choice of blinds for tilt and turn windows are the Corti Glass blinds as they are perfectly fixed to the window frame. You can also opt for blinds without drilling to avoid making holes or pleated curtains. Take a look!
The first thing to consider is thetype of jonquil the window has. The jonquil is the profile that holds the glass to the window frame.
There are three different types:
1. Square jonquil.
2. Beveled jonquil.
3. Round jonquil.
The jonquil bottom must be at least 1 cm, otherwise we will not be able to install our Cortiglass blind system.
It is recommended to use sheet metal threaded screws, these can be purchased at any hardware store. We recommend the use of 2.5 cm screws and drills.
Yes, but you have to keep in mind that the excess centimeters we put in will not be retracted at the top.
This means that the blinds cannot be fully retracted, as the retraction capacity of the fabric is limited.
And if it is exceeded, a piece of fabric will be left uncollected.
No, as the tops would prevent windows from opening.
No, this product cannot be motorized. Its activation is by current.
