Estimated shipping on 28.11.24
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
Maximum transparency and great visibility to the outside.
With screen fabric, the less light there is on the outside, the more visibility there is on the inside, depending on the degree of openness you choose.
This means that during the day you will not be seen from the outside, but during the evening and night there is a certain degree of visibility to the inside.
· Opening 1%: Low visibility to the interior.
· 3% opening: Low visibility to the interior.
· 5% opening: Good visibility for the interior.
· Opening 10%: Great visibility to the interior.
We do not recommend panels that are less than 40 cm wide. It is as much for an aesthetic reason as for a functional reason.
We do not recommend panels wider than 70 cm. Panels larger than this size are very large and heavy, and may look more like doors than panels.
You should bear in mind that the fixed panel will always be at the front of your track. That is to say: if you choose, for example, a Japanese panel with 3 panels opening to the right, the fixed panel will be the one on the right and this will be the one at the front, so that the others will accumulate behind the fixed panel.
Ceiling installation:
They must be 1 cm or 2 cm above the ground.
Wall installation:
possible to adjust the distance in the installation.
In this video we will show you how to cut a gutter from your Japanese panels.
Our collection of Screen Corti 3000 fabrics with an opening of 5% will allow you to protect yourself from the sun's rays without losing visibility and outside light. Its finish is highly resistant, fireproof, it is made of PVC and fiberglass.
The panels move through the rail covering your window in a discreet way, once collected they are overlapped one after another in an orderly way. You will find different shades so you can adapt them to your decoration. At Cortinadecor we make your panel to measure. Fabric suitable for indoors and outdoors. A functional and minimalist product with which to decorate or separate spaces. Installation of the panel to the track is simple. By means of a velcro system it can be easily removed and changed. Because of this, they are easier to clean and replace with the same or different fabrics.
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
Maximum transparency and great visibility to the outside.
With screen fabric, the less light there is on the outside, the more visibility there is on the inside, depending on the degree of openness you choose.
This means that during the day you will not be seen from the outside, but during the evening and night there is a certain degree of visibility to the inside.
· Opening 1%: Low visibility to the interior.
· 3% opening: Low visibility to the interior.
· 5% opening: Good visibility for the interior.
· Opening 10%: Great visibility to the interior.
We do not recommend panels that are less than 40 cm wide. It is as much for an aesthetic reason as for a functional reason.
We do not recommend panels wider than 70 cm. Panels larger than this size are very large and heavy, and may look more like doors than panels.
You should bear in mind that the fixed panel will always be at the front of your track. That is to say: if you choose, for example, a Japanese panel with 3 panels opening to the right, the fixed panel will be the one on the right and this will be the one at the front, so that the others will accumulate behind the fixed panel.
Ceiling installation:
They must be 1 cm or 2 cm above the ground.
Wall installation:
possible to adjust the distance in the installation.
In this video we will show you how to cut a gutter from your Japanese panels.
from 2 working days
Always at your disposal to help and advise you
To create curtains and blinds that adapt to all your windows
from 2 working days
Always at your disposal to help and advise you
To create curtains and blinds that adapt to all your windows